Say Goodbye to Syringes: Friankor’s Wall Printer Auto Ink Extraction System
Table of Contents
Investing in a wall printer is a significant step. Whether you are an artist looking to expand your canvas or an entrepreneur starting a new mural business, you are likely comparing specs: speed, resolution, and print height.
These are important metrics. But alongside print quality, experienced buyers know there is another critical factor that determines your daily success: Workflow Efficiency.
Specifically, how much time will you spend preparing the machine before you can actually start printing?
If you have read our previous guide on essential 💡 wall printer maintenance tips, you know that keeping the printhead clean is the secret to long-term profitability. However, traditional maintenance methods can be a bottleneck for your workflow.
That is why Friankor is introducing a smarter standard.
❌ The Hidden Struggle with Traditional Maintenance
For years, the industry standard for maintaining a printhead has been the “Manual Syringe Method.” To clean the nozzles, you had to physically attach a plastic syringe and tube to suck out air and ink.
While this method is common, it introduces a variable that business owners hate: Inconsistency.
Manual extraction relies entirely on “tactile feeling.” If you don’t apply the vacuum pressure exactly right, the nozzle won’t clear effectively. This often traps new operators in a “Correction Loop.”
The frustration comes when you think you are finished. You run a test print, only to find the lines are still broken or incomplete. This forces you to stop, repeat the extraction process, and test again. This cycle leads to unnecessary ink consumption and wastes the valuable time you should be spending on your client’s project.
🚀 Friankor’s Solution: Auto Ink Extraction System
We asked ourselves a simple question: How can we make the daily operation of a wall printer simpler and more convenient?
To solve this, we developed the Automatic Ink Extraction System. Available as an optional upgrade on our two models of wall printer machines, this system is designed to remove the guesswork from your daily workflow.
We replaced the syringe with a precision, software-controlled pump. Now, instead of relying on a manual technique, you simply click a button in the software.
- It’s Precise: The pump applies a specific, calibrated negative pressure every time.
- It’s Efficient: It clears air bubbles and old ink in a single cycle, usually bout 20s.
- It’s Consistent: Whether you are a beginner on Day 1 or an expert on Year 3, your wall printer receives the same high standard of care.
📹 Video Tutorial: See the Automatic System in Action
Click below to watch how simple the maintenance process becomes with Friankor’s automation.
🛡️ Protect Your Investment: A Maintenance Guide
One of the biggest advantages of this system is how it simplifies your daily and long-term care. It uses a physics-based approach — Negative Pressure Sealing to keep your printhead moist and healthy.
Here is exactly how to use it to extend the life of your wall printer.
✅ A. The Daily Routine: Keep the printhead moist
When you are finished printing for the day, follow this simple routine to lock in moisture:
- Step1: Clean the Surface: Gently wipe the printhead surface with a clean, lint-free cloth to remove any excess ink.
- Step2: Tighten the Caps: Ensure the caps on your ink tanks are screwed on tight. This prevents air leakage.
- Step3: The “Vacuum” Step: Attach the automatic extraction unit tightly to the printhead and click the “Auto Extract” button in the software one last time.
💡 Note: Keep this protective cover on until you are ready to use the machine again.
❓ Why do this?
Because the ink tanks are sealed, the pump creates a vacuum environment (negative pressure) inside the protective cap. This pulls the cap tight against the printhead, physically isolating the nozzle from the air. It keeps the system “wet” and prevents the ink from drying out overnight.
✅ B. Periodic Care: The "Weekly Wake-Up"
If you need to stop printing for more than a week (Medium-term storage), you cannot just leave the machine alone. Inkjet systems need movement. We recommend a “Weekly Wake-Up”:
- Step1. Once a week, power on the wall printer.
- Step2. Run the “Auto Extract” process to flush the lines.
- Step3. Repeat the “Daily Routine” (Clean -> Tighten Caps -> Vacuum Seal) before turning it off.
This ensures the ink inside the tubes doesn’t settle or clog.
✅ C. Important Warning: Long-Term Storage
Honesty is our policy. Even with this advanced automatic system, we strongly advise against leaving the machine idle for more than one month without activation.
Long-term static storage poses a risk to any inkjet device. If you need to store your wall printer for longer than a month, please contact our support team for professional deep-maintenance advice.
🔑 The 3 Golden Rules of Wall Printer Care
To wrap up, if you follow these three core principles, your machine will serve you for years:
- Seal After Use: Always use the auto-extraction to create that vacuum seal after every job. It is the most effective habit to prevent clogging.
- Regular Wake-Ups: Machines are like cars; they need to run. If you are on a break, wake the machine up weekly.
- Stop if in Doubt: If you run the extraction multiple times and still see broken lines, stop. Do not keep forcing it. Contact our professional support team for guidance.
We developed this optional feature because we listened to our users. We know that the easier a wall printer is to use, the faster you can grow your business.
Don’t let the fear of technical maintenance hold you back. Choose a Friankor wall printer with the Automatic Ink Extraction System, and enjoy a smarter, smoother printing experience.
Ready to upgrade your wall printer business? [ 📩 Contact our team] to learn more about our latest wall printer machine price.
FAQ
A1: This is an optional upgrade. While our standard manual systems are effective, we highly recommend this upgrade for users who want to save time and ensure consistent maintenance without the learning curve.
A2: No, it generally saves money. Manual extraction often leads to "over-pulling" or repeated attempts due to mistakes. The Friankor automatic system is calibrated to use only the minimum amount of ink necessary to clear the nozzle effectively.
A3: It is a matter of simple physics. For ink to flow smoothly out of the nozzle, air must enter the tank to replace it. Opening the caps balances the pressure, ensuring the pump doesn't fight against a vacuum, which protects your wall printer's components.
A4: Your machine should be stored in a cool, dry, and dust-free environment. Absolutely avoid direct sunlight and extreme temperature changes.
Contact Us
FIll out the form below and we will cantact you as soon as possible
